Non-contact Ultrasonic Assisted Milling And Drilling Device With Various Spindles

Home » Products » Ultrasonic machining system » Non-contact Ultrasonic Assisted Milling And Drilling Device With Various Spindles

Share to:

Non-contact Ultrasonic Assisted Milling And Drilling Device With Various Spindles

Frequency: 20kHz Power: 500W Spindle Mode: BT Series/ISO Series/ HSK Series Amplitude: More than 10um Warranty: One Year Lead Time: 30days Min Order: 1PCS

Availability:

Quantity:



Inquire Add to Basket

Model:
SP-AM20
Brand:
SP
Code:
8543709990

Product Description

Description:

Ultrasonic machining refers to the machining method that the tool end face vibrates at high frequency to drive the abrasive particles in the abrasive particle suspension to impact the workpiece material at high frequency to remove the workpiece material and form the workpiece.

ultrasonic spindle

The machining technology of SP TECH ultrasonic tool holders is mainly used to reciprocate the tool in a fixed direction at a high-speed frequency of 20,000 to 40,000 times per second by the resonance effect. The amplitude can make the cutting removal in the machining process more effective, therefore simultaneously reducing the cutting force and chipping of hard-to-cut materials as well as optimizing the machined surface.

The whole ultrasonic system uses particular resonance theory to optimize the impedance matching of subsystems such as ultrasonic power, transducer, horn and holder, so as to ensure the continuous working stability of the system. Reduce energy consumption and save cost.

Specification:

Working frequency	20 KHz
Power	500w
Product mode	BT/ ISO/ HSK/ CAT series drilling machine handle
Amplitude	10um or more(adjustable)
Speed	20000 r/min
Matching tool	Carbide drilling head Φ2-Φ10mm

Display of ultrasonic assisted system working efficiency:

Application:

Ultrasonic machining not only overcomes the disadvantage that some special materials are not easy to be machined, but also improves the machining accuracy, shortens the machining time and improves the efficiency. And its position in cutting, grinding and finishing is irreplaceable. The device is suitable for turning, milling, drilling and grinding of diamond, glass, ceramics, tungsten carbide, titanium alloy and other materials. Compared with other processing methods, it has the advantages of low cost, high precision and no need to change the machine tool.

Advantage:

1. There are a variety of series of tool holders that can be used with the host.

2. It can run continuously without preheating.

3. It is not restricted by whether the material is conductive.

4. The tool has small macroscopic force on the workpiece and low thermal effect, so it can process thin-walled, narrow-slit and thin-walled workpieces.