Ultrasonic machining refers to the machining method that the tool end face vibrates at high frequency to drive the abrasive particles in the abrasive particle suspension to impact the workpiece material at high frequency to remove the workpiece material and form the workpiece.
The machining technology of SP TECH ultrasonic tool holders is mainly used to reciprocate the tool in a fixed direction at a high-speed frequency of 20,000 to 40,000 times per second by the resonance effect. The amplitude can make the cutting removal in the machining process more effective, therefore simultaneously reducing the cutting force and chipping of hard-to-cut materials as well as optimizing the machined surface.
The whole ultrasonic system uses particular resonance theory to optimize the impedance matching of subsystems such as ultrasonic power, transducer, horn and holder, so as to ensure the continuous working stability of the system. Reduce energy consumption and save cost.
Working frequency | 20 KHz |
Power | 500w |
Product mode | BT/ ISO/ HSK/ CAT series drilling machine handle |
Amplitude | 10um or more(adjustable) |
Speed | 20000 r/min |
Matching tool | Carbide drilling head Φ2-Φ10mm |
1. There are a variety of series of tool holders that can be used with the host.
2. It can run continuously without preheating.
3. It is not restricted by whether the material is conductive.
4. The tool has small macroscopic force on the workpiece and low thermal effect, so it can process thin-walled, narrow-slit and thin-walled workpieces.
Address: No.30 DATANG VILLAGE FUYANG DISTRICT HANGZHOU CITY ZHEJIANG PROVINCE CHINA
Email: info@shengpaigroup.com
Tel: 0086-571-63127797
Mobile: 0086-15888033040
0086-15355441892
NEWSLETTER
Signup to be the first to know about discounts and new product releases.
Hangzhou Shengpai Technology Co.,Ltd © 2020 - ALL RIGHTS RESERVED