 |
| Quantity: | |
|---|---|
SPS20-1000S
SP
8543709990
Ultrasonic extraction is a process of using high-frequency sound waves to extract compounds from solid or liquid samples. This technique is often used in the fields of chemistry, food science, and biotechnology to extract bioactive compounds from natural products, such as plants, fruits, and vegetables.
They consist of three parts:
A generator that provides and controls the power.
A transducer (also known as a converter) containing a piezoelectric crystal that converts electrical energy into mechanical motion at very high frequency.The converter also amplifies the signal.
The titanium probe or "horn" vibrates rapidly along the longitudinal direction to transmit ultrasonic energy to the sample.
Homogenization occurs both directly through ultrasonic forces and through cavitation (the rapid formation and rupture of bubbles).
The combination of these forces makes ultrasonic homogenizers ideal for cell rupture and particle size reduction.
Model | SPS20-500S | SPS20-1000S | SPS20-1600S | SPS20-2000 | SPS20-3000 | SPS20-3000Z |
Frequency | 20Khz | 20Khz | 20Khz | 20Khz | 20Khz | 20Khz |
Power | 500 W | 1000 W | 1600 W | 2000W | 3000W | 3000 W |
Voltage | 220V | 220V | 220V | 220V | 220V | 220V |
Pressure | Normal | Normal | Normal | 35 MPa | 35 MPa | 35 MPa |
Intensity of sound | ＞10 W/cm² | ＞10 W/cm² | ＞10 W/cm² | ＞40 W/cm² | ＞60 W/cm² | ＞60 W/cm² |
Processing capacity (L/H) | 0.5-2.0 | 1.0-4.0 | 10.0 | 20.0 | 50.0 | 100.0 |
Material of probe | Titanium Alloy | Titanium Alloy | Titanium Alloy | Titanium Alloy | Titanium Alloy | Titanium Alloy |
Generator | Digital type | Digital type | Digital type | Digital type | Digital type | Digital type |
Ultrasonic extractor are powerful, but they also generate a lot of heat and noise as a result of their use of ultrasonic energy.
Therefore, it is highly recommended that you use ear protectors and/or keep them in an insulated housing to reduce noise levels during the homogenization process.
Reaction kettle, cooling device and circulation device can be designed according to your application requirements.
To maximize the life of the speaker, clean and dry the speaker after each use.
Failure to properly maintain the horn can lead to pitting (localized corrosion that creates holes in the titanium), which can reduce the horn's effectiveness.
Ultrasonic sonifiers must be used with liquid samples.
They are not suitable for dry homogenization applications.
Immerse the horn into the sample before turning on the instrument and ensure that the horn does not touch the sides of the container during operation.
1. Core parts with Titanium alloy materials
2. Ultrasonic probe with different size and type for selection
3. Matching with digital generator, auto-tuning, auto search frequency
4. With automatic alarm protection, easy to operate
5. Power adjustable from 1% to 99%
6. Amplitude stability and high, long working hours, more efficiency
7. Provide consulting services and custom reactor designs
Ultrasonic extraction is a process of using high-frequency sound waves to extract compounds from solid or liquid samples. This technique is often used in the fields of chemistry, food science, and biotechnology to extract bioactive compounds from natural products, such as plants, fruits, and vegetables.
They consist of three parts:
A generator that provides and controls the power.
A transducer (also known as a converter) containing a piezoelectric crystal that converts electrical energy into mechanical motion at very high frequency.The converter also amplifies the signal.
The titanium probe or "horn" vibrates rapidly along the longitudinal direction to transmit ultrasonic energy to the sample.
Homogenization occurs both directly through ultrasonic forces and through cavitation (the rapid formation and rupture of bubbles).
The combination of these forces makes ultrasonic homogenizers ideal for cell rupture and particle size reduction.
Model | SPS20-500S | SPS20-1000S | SPS20-1600S | SPS20-2000 | SPS20-3000 | SPS20-3000Z |
Frequency | 20Khz | 20Khz | 20Khz | 20Khz | 20Khz | 20Khz |
Power | 500 W | 1000 W | 1600 W | 2000W | 3000W | 3000 W |
Voltage | 220V | 220V | 220V | 220V | 220V | 220V |
Pressure | Normal | Normal | Normal | 35 MPa | 35 MPa | 35 MPa |
Intensity of sound | ＞10 W/cm² | ＞10 W/cm² | ＞10 W/cm² | ＞40 W/cm² | ＞60 W/cm² | ＞60 W/cm² |
Processing capacity (L/H) | 0.5-2.0 | 1.0-4.0 | 10.0 | 20.0 | 50.0 | 100.0 |
Material of probe | Titanium Alloy | Titanium Alloy | Titanium Alloy | Titanium Alloy | Titanium Alloy | Titanium Alloy |
Generator | Digital type | Digital type | Digital type | Digital type | Digital type | Digital type |
Ultrasonic extractor are powerful, but they also generate a lot of heat and noise as a result of their use of ultrasonic energy.
Therefore, it is highly recommended that you use ear protectors and/or keep them in an insulated housing to reduce noise levels during the homogenization process.
Reaction kettle, cooling device and circulation device can be designed according to your application requirements.
To maximize the life of the speaker, clean and dry the speaker after each use.
Failure to properly maintain the horn can lead to pitting (localized corrosion that creates holes in the titanium), which can reduce the horn's effectiveness.
Ultrasonic sonifiers must be used with liquid samples.
They are not suitable for dry homogenization applications.
Immerse the horn into the sample before turning on the instrument and ensure that the horn does not touch the sides of the container during operation.
1. Core parts with Titanium alloy materials
2. Ultrasonic probe with different size and type for selection
3. Matching with digital generator, auto-tuning, auto search frequency
4. With automatic alarm protection, easy to operate
5. Power adjustable from 1% to 99%
6. Amplitude stability and high, long working hours, more efficiency
7. Provide consulting services and custom reactor designs
NEWSLETTER