Availability: | |
---|---|
Quantity: | |
SP-520A
SP
8543709990
Ultrasonic impedance detector, also known as ultrasonic frequency measuring instrument, ultrasonic transducer parameter analyzer, ultrasonic transducer impedance tester and ultrasonic performance analyzer. This instrument is composed of hardware and software. The impedance analyzer can accurately measure in the impedance range and wide frequency range. It uses the object to have different conductive effects. When a fixed low-level current is added to the object surface, it calculates the parameters and performance of various devices and equipment of the object through the impedance.
The impedance measurement of piezoelectric devices is a prerequisite for the correct use of devices. For piezoelectric devices, the main parameters can be obtained by impedance analyzer, including resonance frequency FS, anti resonance frequency FP, half power points F1 and F2, greater admittance Gmax, electrostatic capacitance C0, dynamic reactance R1, dynamic capacitance C1, dynamic inductance L1, free capacitance CT, free dielectric constant, mechanical quality factor QM, electromechanical coupling coefficients keff, KP, K31, k33, etc, Five characteristic curves of piezoelectric devices (admittance characteristic diagram, impedance characteristic diagram, admittance polar coordinate diagram, impedance polar coordinate diagram and logarithmic coordinate diagram) can be drawn.
Functions moldel | SP520A-S | SP520A-T | SP520A-V |
Characteristics | Portable,Full-screen touch screen,7.8 inch screen | ||
Size | L 240 mm;W 190mm;Front height 50mm;Back height 100mm | ||
Frequency range | 1KHZ-1MHZ | 1-3MHZ | 1-5MHZ |
Measurement | All parametric graphs | ||
Basic accuracy | <0.1% | ||
Measuring speed | 5 seconds per piece(1200 point scan) | ||
Frequency accuracy | ±10ppm | ||
Phase Accuracy | 0.15 degrees | ||
Ambient temperature | 10-40ºC | ||
Impedance range | 1Ω-1MΩ | ||
Stepped frequency | 0.1Hz to Any | ||
Power supply | AC100V-AC250V,50-60Hz |
Ultrasonic impedance analyzer is mainly used to measure the performance of ultrasonic transducer, ultrasonic horn, piezoelectric ceramics, capacitance and inductance. It is one of the convenient tools for impedance scanning and characteristic analysis of ultrasonic equipment. No matter where you go, you can quickly and conveniently test the parameter characteristics of devices, and you can share them remotely immediately.
The impedance analyzer can accurately measure in the impedance range and wide frequency range. It uses the object to have different conductive effects. When a fixed low-level current is added to the object surface, it calculates the parameters and performance of various devices and equipment of the object through the impedance.
Therefore, the instrument is applicable to the measurement of various ultrasonic devices, including ultrasonic transducer, ultrasonic horn, ultrasonic mold (cutter head), independent piezoelectric ceramics, ultrasonic cleaning machine, ultrasonic plastic welding machine, magnetostrictive materials, ultrasonic crusher, ultrasonic atomization, ultrasonic emulsification, ultrasonic descaling, and other devices and equipment using ultrasonic. During the development and production of ultrasonic equipment, engineers can use ultrasonic frequency measuring instrument to detect whether ultrasonic parts and products, as well as their quality, performance and parameters meet the requirements.
1. High impedance measurement accuracy, up to 0.001khz;
2. It is easy to judge defects through admittance circle and logarithmic curve;
3. The test results completely distinguish the vibration point and half power point;
4. The test data computer can store and print indefinitely and trace the data source;
5. Automatic filtering and statistics, and parameter filtering can be set;
6. Automatic operation has high efficiency and simple operation, avoiding manual error;
7. It is simple, easy to use, the combination of indicators and graphics, accurate parameters, low price, very strong availability for production, etc.
Ultrasonic impedance detector, also known as ultrasonic frequency measuring instrument, ultrasonic transducer parameter analyzer, ultrasonic transducer impedance tester and ultrasonic performance analyzer. This instrument is composed of hardware and software. The impedance analyzer can accurately measure in the impedance range and wide frequency range. It uses the object to have different conductive effects. When a fixed low-level current is added to the object surface, it calculates the parameters and performance of various devices and equipment of the object through the impedance.
The impedance measurement of piezoelectric devices is a prerequisite for the correct use of devices. For piezoelectric devices, the main parameters can be obtained by impedance analyzer, including resonance frequency FS, anti resonance frequency FP, half power points F1 and F2, greater admittance Gmax, electrostatic capacitance C0, dynamic reactance R1, dynamic capacitance C1, dynamic inductance L1, free capacitance CT, free dielectric constant, mechanical quality factor QM, electromechanical coupling coefficients keff, KP, K31, k33, etc, Five characteristic curves of piezoelectric devices (admittance characteristic diagram, impedance characteristic diagram, admittance polar coordinate diagram, impedance polar coordinate diagram and logarithmic coordinate diagram) can be drawn.
Functions moldel | SP520A-S | SP520A-T | SP520A-V |
Characteristics | Portable,Full-screen touch screen,7.8 inch screen | ||
Size | L 240 mm;W 190mm;Front height 50mm;Back height 100mm | ||
Frequency range | 1KHZ-1MHZ | 1-3MHZ | 1-5MHZ |
Measurement | All parametric graphs | ||
Basic accuracy | <0.1% | ||
Measuring speed | 5 seconds per piece(1200 point scan) | ||
Frequency accuracy | ±10ppm | ||
Phase Accuracy | 0.15 degrees | ||
Ambient temperature | 10-40ºC | ||
Impedance range | 1Ω-1MΩ | ||
Stepped frequency | 0.1Hz to Any | ||
Power supply | AC100V-AC250V,50-60Hz |
Ultrasonic impedance analyzer is mainly used to measure the performance of ultrasonic transducer, ultrasonic horn, piezoelectric ceramics, capacitance and inductance. It is one of the convenient tools for impedance scanning and characteristic analysis of ultrasonic equipment. No matter where you go, you can quickly and conveniently test the parameter characteristics of devices, and you can share them remotely immediately.
The impedance analyzer can accurately measure in the impedance range and wide frequency range. It uses the object to have different conductive effects. When a fixed low-level current is added to the object surface, it calculates the parameters and performance of various devices and equipment of the object through the impedance.
Therefore, the instrument is applicable to the measurement of various ultrasonic devices, including ultrasonic transducer, ultrasonic horn, ultrasonic mold (cutter head), independent piezoelectric ceramics, ultrasonic cleaning machine, ultrasonic plastic welding machine, magnetostrictive materials, ultrasonic crusher, ultrasonic atomization, ultrasonic emulsification, ultrasonic descaling, and other devices and equipment using ultrasonic. During the development and production of ultrasonic equipment, engineers can use ultrasonic frequency measuring instrument to detect whether ultrasonic parts and products, as well as their quality, performance and parameters meet the requirements.
1. High impedance measurement accuracy, up to 0.001khz;
2. It is easy to judge defects through admittance circle and logarithmic curve;
3. The test results completely distinguish the vibration point and half power point;
4. The test data computer can store and print indefinitely and trace the data source;
5. Automatic filtering and statistics, and parameter filtering can be set;
6. Automatic operation has high efficiency and simple operation, avoiding manual error;
7. It is simple, easy to use, the combination of indicators and graphics, accurate parameters, low price, very strong availability for production, etc.
Address: No.30 DATANG VILLAGE FUYANG DISTRICT HANGZHOU CITY ZHEJIANG PROVINCE CHINA
Email: info@shengpaigroup.com
Tel: 0086-571-63127797
Mobile: 0086-15888033040
0086-15355441892
NEWSLETTER
Signup to be the first to know about discounts and new product releases.