Availability: | |
---|---|
Quantity: | |
SPS20-2000/3000
SP
8543709990
Ultrasonic-assisted extraction is an effective and rapid technique for extracting cannabis concentrates. It does improve the diffusion process by accelerating mass transfer within the plant materials, causing the cell walls to rupture and to release the desired compounds. A vibrating ultrasonic probe immersed in a liquid will transmit alternating high and low pressure waves. These fluctuations cause the liquid molecular cohesive forces to break-down, pulling apart the liquid and creating millions of micro-bubbles (cavities), which expand during the low pressure phases and implode violently during the high pressure phases. As the bubbles collapse, millions of microscopic shock waves, micro jet streams, and eddies are generated at the implosion sites and propagated to the surrounding medium. Although this phenomenon, known as cavitation, lasts but a few microseconds, and the amount of energy released by each individual bubble is minimal, the cumulative amount of energy generated by the imploding cavities is extremely high promoting surface peeling, erosion, and particle breakdown. By disrupting the cell in this manner, solvent penetration is enhanced, accelerating the release of bioactive compounds and other components from the biological matrix into the extraction medium. Because focused ultrasound extraction provides more than 100 times the radiated energy generated in an ultrasonic bath, it is ideally suited for the extraction of beneficial cannabinoid. When extracted properly, the resulting concentrate is reminiscent of the cannabis strain it was extracted from – the taste smell and effects are simply amplified due to a larger concentration by weight. On average, cannabis plant buds will yield about 15% of extracted concentrate. As expected, the quality of the extract and bioavailability will greatly depend on the amount and potency of the plant matter/trichrome (the crystalline hair-like structures coating the outside surface of the flowers) used. SP TECH manufactures a variety of high amplitude ultrasonic liquid processors to satisfy the low volume requirements of the laboratory, as well as large scale continuous flow-through systems to satisfy the high volume requirements of full scale production.
Model | SPS20-500S | SPS20-1000S | SPS20-1600S | SPS20-2000 | SPS20-3000 | SPS20-3000Z |
Frequency | 20Khz | 20Khz | 20Khz | 20Khz | 20Khz | 20Khz |
Power | 500 W | 1000 W | 1600 W | 2000W | 3000W | 3000 W |
Voltage | 220V | 220V | 220V | 220V | 220V | 220V |
Pressure | Normal | Normal | Normal | 35 MPa | 35 MPa | 35 MPa |
Intensity of sound | >10 W/cm² | >10 W/cm² | >10 W/cm² | >40 W/cm² | >60 W/cm² | >60 W/cm² |
Processing capacity (L/H) | 0.5-2.0 | 1.0-4.0 | 10.0 | 20.0 | 50.0 | 100.0 |
Material of probe | Titanium Alloy | Titanium Alloy | Titanium Alloy | Titanium Alloy | Titanium Alloy | Titanium Alloy |
Generator | Digital type | Digital type | Digital type | Digital type | Digital type | Digital type |
Ultrasonic CBD Extraction Expertise: The Ultrasonic Liquid Processor excels in CBD extraction through the utilization of ultrasonic waves. These high-frequency vibrations effectively break down plant material, enhancing the release of CBD compounds. This results in higher extraction yields and superior quality CBD extracts.
Powerful Homogenization Capability: Our ultrasonic homogenizer ensures thorough mixing and dispersion of CBD compounds within the liquid medium. This homogenization process eliminates the risk of phase separation and enhances the bioavailability of CBD in the final product.
Precise Control and Customization: The Liquid Processor offers precise control over critical extraction parameters, including amplitude, temperature, and processing time. This level of customization allows users to optimize the extraction process for different CBD strains and target compounds, ensuring maximum efficiency and desired outcomes.
Energy-Efficient Operation: With a focus on sustainability, our Liquid Processor operates at low energy consumption while maintaining high extraction efficiency. By minimizing energy usage, it not only reduces operational costs but also promotes eco-friendly practices.
1. Pharmaceutical Industry: Enables efficient extraction of CBD for pharmaceutical formulation and drug development, catering to the growing demand for CBD-based medications.
2. Nutraceutical Industry: Facilitates the extraction of CBD for the formulation of CBD-infused nutraceutical products, meeting the increasing consumer demand for natural health and wellness solutions.
3. CBD Product Manufacturing: Supports the extraction of CBD for the production of various CBD products, including oils, tinctures, topicals, edibles, and more.
4. Research and Development: Provides a reliable tool for laboratory-scale research, allowing scientists to explore innovative extraction techniques and optimize CBD extraction parameters.
5. Quality Control: Assists in the analysis and quality control of CBD extracts, ensuring consistency and standardization of active compounds.
6. Cosmeceutical Industry: Enhances the extraction of CBD for use in skincare and beauty products, harnessing the potential benefits of CBD for skin health and rejuvenation.
7. Health and Wellness: Contributes to the extraction of CBD from natural sources, promoting overall health and wellness through the production of high-quality CBD extracts.
8. Beverage Industry: Enables the extraction of CBD for the formulation of CBD-infused beverages, offering consumers a novel and convenient way to consume CBD.
9. Agricultural Industry: Supports the extraction of CBD from hemp plants, contributing to the development of sustainable practices and utilization of hemp as a valuable agricultural resource.
1. Core parts with Titanium materials
2. Ultrasonic horn with different size and type for selection
3. Matching with digital generator, auto-tuning, auto search frequency
4. With automatic alarm protection, easy to operate
5. Power adjustable from 1% to 99%
6. Amplitude stability, long working hours, radiation area is increased 2.5 times than traditional tools
7. Provide consulting services and custom reactor designs
8. Custom sizes available for laboratory and high volume industrial applications.
Customers' evalution as follow:
The ultrasonic liquid processor works very well.
We improved yield by 5% if we run for 5 minutes.
You have been most kind and helpful. Thank you for your expert communication.
Customers' recognition and trust is our driving force.
Shengpai Technology relies on “Customer Service Being First” as its corporate culture. Aim is ”Quality First, Service First”. Today, because of its abundant professional knowledge and good after-sales service, Shengpai Technology has gained a very good reputation.
1. How does ultrasonic extraction enhance the efficiency of CBD extraction?
Ultrasonic extraction utilizes high-frequency vibrations to break down plant cell walls, allowing for better release of CBD compounds, resulting in higher extraction efficiency.
2. Can the Liquid Processor be customized for specific CBD strains and target compounds?
Yes, the Liquid Processor offers precise control over extraction parameters, allowing customization for different CBD strains and target compounds.
3. What are the advantages of ultrasonic extraction over traditional methods?
Ultrasonic extraction offers higher extraction yields, improved quality of extracts, preservation of CBD integrity, and reduced extraction time compared to traditional methods.
4. How does the Liquid Processor preserve the integrity of CBD compounds during extraction?
The Liquid Processor's gentle yet powerful ultrasonic waves ensure minimal degradation of CBD compounds, preserving their potency and therapeutic properties during extraction.
5. Is the Liquid Processor suitable for both small-scale and large-scale production?
Yes, the Liquid Processor is available in various sizes and capacities, making it suitable for both small-scale laboratory research and large-scale industrial production.
6. Can the Liquid Processor be used for research purposes in laboratories?
Absolutely, the Liquid Processor is widely used in laboratory research for exploring innovative extraction techniques and optimizing CBD extraction parameters.
7. What industries can benefit from the Ultrasonic Liquid Processor?
The Ultrasonic Liquid Processor is beneficial for industries such as pharmaceuticals, nutraceuticals, CBD product manufacturing, cosmeceuticals, and the cannabis industry, among others.
8. Does the Liquid Processor offer pre-programmed settings for common extraction protocols?
Yes, the Liquid Processor features pre-programmed settings for common extraction protocols, ensuring ease of use and saving valuable time.
9. What are the warranty and after-sales support options provided with the Ultrasonic Liquid Processor?
We offer a comprehensive warranty for the Ultrasonic Liquid Processor, along with dedicated after-sales support to ensure customer satisfaction and optimal performance of the equipment.
Ultrasonic-assisted extraction is an effective and rapid technique for extracting cannabis concentrates. It does improve the diffusion process by accelerating mass transfer within the plant materials, causing the cell walls to rupture and to release the desired compounds. A vibrating ultrasonic probe immersed in a liquid will transmit alternating high and low pressure waves. These fluctuations cause the liquid molecular cohesive forces to break-down, pulling apart the liquid and creating millions of micro-bubbles (cavities), which expand during the low pressure phases and implode violently during the high pressure phases. As the bubbles collapse, millions of microscopic shock waves, micro jet streams, and eddies are generated at the implosion sites and propagated to the surrounding medium. Although this phenomenon, known as cavitation, lasts but a few microseconds, and the amount of energy released by each individual bubble is minimal, the cumulative amount of energy generated by the imploding cavities is extremely high promoting surface peeling, erosion, and particle breakdown. By disrupting the cell in this manner, solvent penetration is enhanced, accelerating the release of bioactive compounds and other components from the biological matrix into the extraction medium. Because focused ultrasound extraction provides more than 100 times the radiated energy generated in an ultrasonic bath, it is ideally suited for the extraction of beneficial cannabinoid. When extracted properly, the resulting concentrate is reminiscent of the cannabis strain it was extracted from – the taste smell and effects are simply amplified due to a larger concentration by weight. On average, cannabis plant buds will yield about 15% of extracted concentrate. As expected, the quality of the extract and bioavailability will greatly depend on the amount and potency of the plant matter/trichrome (the crystalline hair-like structures coating the outside surface of the flowers) used. SP TECH manufactures a variety of high amplitude ultrasonic liquid processors to satisfy the low volume requirements of the laboratory, as well as large scale continuous flow-through systems to satisfy the high volume requirements of full scale production.
Model | SPS20-500S | SPS20-1000S | SPS20-1600S | SPS20-2000 | SPS20-3000 | SPS20-3000Z |
Frequency | 20Khz | 20Khz | 20Khz | 20Khz | 20Khz | 20Khz |
Power | 500 W | 1000 W | 1600 W | 2000W | 3000W | 3000 W |
Voltage | 220V | 220V | 220V | 220V | 220V | 220V |
Pressure | Normal | Normal | Normal | 35 MPa | 35 MPa | 35 MPa |
Intensity of sound | >10 W/cm² | >10 W/cm² | >10 W/cm² | >40 W/cm² | >60 W/cm² | >60 W/cm² |
Processing capacity (L/H) | 0.5-2.0 | 1.0-4.0 | 10.0 | 20.0 | 50.0 | 100.0 |
Material of probe | Titanium Alloy | Titanium Alloy | Titanium Alloy | Titanium Alloy | Titanium Alloy | Titanium Alloy |
Generator | Digital type | Digital type | Digital type | Digital type | Digital type | Digital type |
Ultrasonic CBD Extraction Expertise: The Ultrasonic Liquid Processor excels in CBD extraction through the utilization of ultrasonic waves. These high-frequency vibrations effectively break down plant material, enhancing the release of CBD compounds. This results in higher extraction yields and superior quality CBD extracts.
Powerful Homogenization Capability: Our ultrasonic homogenizer ensures thorough mixing and dispersion of CBD compounds within the liquid medium. This homogenization process eliminates the risk of phase separation and enhances the bioavailability of CBD in the final product.
Precise Control and Customization: The Liquid Processor offers precise control over critical extraction parameters, including amplitude, temperature, and processing time. This level of customization allows users to optimize the extraction process for different CBD strains and target compounds, ensuring maximum efficiency and desired outcomes.
Energy-Efficient Operation: With a focus on sustainability, our Liquid Processor operates at low energy consumption while maintaining high extraction efficiency. By minimizing energy usage, it not only reduces operational costs but also promotes eco-friendly practices.
1. Pharmaceutical Industry: Enables efficient extraction of CBD for pharmaceutical formulation and drug development, catering to the growing demand for CBD-based medications.
2. Nutraceutical Industry: Facilitates the extraction of CBD for the formulation of CBD-infused nutraceutical products, meeting the increasing consumer demand for natural health and wellness solutions.
3. CBD Product Manufacturing: Supports the extraction of CBD for the production of various CBD products, including oils, tinctures, topicals, edibles, and more.
4. Research and Development: Provides a reliable tool for laboratory-scale research, allowing scientists to explore innovative extraction techniques and optimize CBD extraction parameters.
5. Quality Control: Assists in the analysis and quality control of CBD extracts, ensuring consistency and standardization of active compounds.
6. Cosmeceutical Industry: Enhances the extraction of CBD for use in skincare and beauty products, harnessing the potential benefits of CBD for skin health and rejuvenation.
7. Health and Wellness: Contributes to the extraction of CBD from natural sources, promoting overall health and wellness through the production of high-quality CBD extracts.
8. Beverage Industry: Enables the extraction of CBD for the formulation of CBD-infused beverages, offering consumers a novel and convenient way to consume CBD.
9. Agricultural Industry: Supports the extraction of CBD from hemp plants, contributing to the development of sustainable practices and utilization of hemp as a valuable agricultural resource.
1. Core parts with Titanium materials
2. Ultrasonic horn with different size and type for selection
3. Matching with digital generator, auto-tuning, auto search frequency
4. With automatic alarm protection, easy to operate
5. Power adjustable from 1% to 99%
6. Amplitude stability, long working hours, radiation area is increased 2.5 times than traditional tools
7. Provide consulting services and custom reactor designs
8. Custom sizes available for laboratory and high volume industrial applications.
Customers' evalution as follow:
The ultrasonic liquid processor works very well.
We improved yield by 5% if we run for 5 minutes.
You have been most kind and helpful. Thank you for your expert communication.
Customers' recognition and trust is our driving force.
Shengpai Technology relies on “Customer Service Being First” as its corporate culture. Aim is ”Quality First, Service First”. Today, because of its abundant professional knowledge and good after-sales service, Shengpai Technology has gained a very good reputation.
1. How does ultrasonic extraction enhance the efficiency of CBD extraction?
Ultrasonic extraction utilizes high-frequency vibrations to break down plant cell walls, allowing for better release of CBD compounds, resulting in higher extraction efficiency.
2. Can the Liquid Processor be customized for specific CBD strains and target compounds?
Yes, the Liquid Processor offers precise control over extraction parameters, allowing customization for different CBD strains and target compounds.
3. What are the advantages of ultrasonic extraction over traditional methods?
Ultrasonic extraction offers higher extraction yields, improved quality of extracts, preservation of CBD integrity, and reduced extraction time compared to traditional methods.
4. How does the Liquid Processor preserve the integrity of CBD compounds during extraction?
The Liquid Processor's gentle yet powerful ultrasonic waves ensure minimal degradation of CBD compounds, preserving their potency and therapeutic properties during extraction.
5. Is the Liquid Processor suitable for both small-scale and large-scale production?
Yes, the Liquid Processor is available in various sizes and capacities, making it suitable for both small-scale laboratory research and large-scale industrial production.
6. Can the Liquid Processor be used for research purposes in laboratories?
Absolutely, the Liquid Processor is widely used in laboratory research for exploring innovative extraction techniques and optimizing CBD extraction parameters.
7. What industries can benefit from the Ultrasonic Liquid Processor?
The Ultrasonic Liquid Processor is beneficial for industries such as pharmaceuticals, nutraceuticals, CBD product manufacturing, cosmeceuticals, and the cannabis industry, among others.
8. Does the Liquid Processor offer pre-programmed settings for common extraction protocols?
Yes, the Liquid Processor features pre-programmed settings for common extraction protocols, ensuring ease of use and saving valuable time.
9. What are the warranty and after-sales support options provided with the Ultrasonic Liquid Processor?
We offer a comprehensive warranty for the Ultrasonic Liquid Processor, along with dedicated after-sales support to ensure customer satisfaction and optimal performance of the equipment.
Address: No.30 DATANG VILLAGE FUYANG DISTRICT HANGZHOU CITY ZHEJIANG PROVINCE CHINA
Email: info@shengpaigroup.com
Tel: 0086-571-63127797
Mobile: 0086-15888033040
0086-15355441892
NEWSLETTER
Signup to be the first to know about discounts and new product releases.